For troublesome clay that gets sticky or greasy when wet, then sets hard, cracks or crusts as it dries. CLAY FIXER helps water enter and makes the treated clay more workable for roots.
| Use | Dose & direction |
|---|---|
| Turned or open clay | 2 mL per m² |
| Compacted or hard clay | 5 mL per m² |
| Local spot fix | 3 mL per m² |
| Apply | Measure only the affected area; follow the current PRO label |
CLAY FIXER PRO: concentrated clay treatment.
For sticky, sealing and hard-setting clay in professional turf and growing programs. Choose by clay condition: 2 mL/m² for turned or open clay, 5 mL/m² for compacted or hard clay, or 3 mL/m² for a local spot fix, as printed on the supplied PRO label. Measure only the affected area and follow the current pack directions.
Published clay testing reports up to 20% more water uptake than gypsum and up to 17% more than an untreated control, with improvements in initial uptake, spread and useful water retention.
Liquid delivery offers a lower-volume application route than bulk gypsum. For major projects, account for drainage, specifications and any soil test when planning the treatment. Available in 10 L and 20 L PRO packs.
Treat the clay—not just the puddle.
Messy clay can seal at the surface, turn greasy underfoot and become brick-hard when dry. CLAY FIXER is made for that difficult behaviour, helping water move into the treated area and making the clay easier to work.
It is intended to reduce runoff and puddling caused by poor infiltration and support more useful irrigation and root access.
What better water movement supports.
- Improved water entry and profile penetration.
- More even moisture movement and useful root-zone access.
- Better aeration as water drains from existing pores.
- More workable clay and stronger root potential.
- Less surface water waste where the profile can drain.
Does this sound like your clay?
Look for sticky or greasy clay when wet, hard-setting ground when dry, crusts, cracks, sealing or muddy puddles. CLAY FIXER can be used across lawns, gardens, trees, turf and larger growing areas where these symptoms are causing trouble.
If clear water beads or runs off while the soil beneath stays dry, explore POWER BREAKER for water entry as well. For large or construction projects, a soil test can help plan the rate and application.
Apply to moist soil.
Distribute evenly using the current label rate. Pre-wet dry clay first; apply the treatment, water in lightly if needed, and allow the soil to dry naturally.
Monitor infiltration, runoff, puddling and workability. Reassess after digging, aeration, renovation, heavy traffic or disturbance. Do not substitute a delivery schedule for an application decision.
Benefit descriptions reviewed against the supplied catalogues on 29 September 2026. Pack prices come from the local listing snapshot; follow the current label for your selected formula.